Step-by-Step Guide: Extracting IP/MAC Using PS on PCs

Have you been facing some network or troubleshooting issues on your PC? Or maybe you simply need to fix your access control or networking problems caused by your device or hardware. In cases like this, knowing your MAC or IP address will come in handy.

While other more straightforward methods exist, you can find your IP or MAC address on Windows using PowerShell. Let’s find out how.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

How to Find Your IP or MAC Address on a Windows Using the PowerShell

Figuring out your IP address using PowerShell is easy. Here’s how you can get started:

1. Head to the Start menu search bar, type in ‘powershell,’ and select the best match.
2. Once the PowerShell is up, type in the following command and hit Enter:
   Get-NetIPAddress <code class="language-powershell" lang="powershell">-AddressFamily IPV4

That’s it; as soon as you type in this command, the PowerShell will give you the IPv4 addresses of all network adapters of your Windows system. As you can see below, you will get your PC’s IP address, subnet mask, default gateway, etc.

Find the MAC Address on Your Windows

Like your IP address, finding out about your MAC address works somewhat similarly. Again, once you’re inside the PowerShell, type in the following command on the shell and hit Enter:

Get-NetAdapter

That’s it; this command will give you the details about all the network adapters from your system, along with their MAC addresses. Look over at the “MacAddress” column, and you will get the address.

An Alternate Way to Find the MAC Address on Windows

While the “Get-NetAdapter” will work in most cases, we’d understand that if you’d want to try a different approach for any reason. In cases like that, the “ipconfig” command is your second-best bet.

In fact, the “ipconfig” will give you all the information, which can make your screen unnecessarily complicated. So it’s important that you filter out the fluff, and only get the information that you need. For that, add the “findstr “Description Physical”” section at the end of your command.

Here’s how you can do that:

ipconfig /all | findstr "Description Physical" <img alt="windows powershell" height="665" src="https://static0.makeuseofimages.com/wordpress/wp-content/uploads/2023/06/windows-powershell-4.jpg" width="1200" />

Your adapter will be listed along with its MAC address, referenced by “Description” and “Physical Address”.

Finding Your IP or MAC Address on Windows PC

So that’s all about your IP or MAC address on your Windows PC. Type in the above commands, and you will get your MAC or IP addresses instantly. Of course, PowerShell is just one way of doing that. For instance, you can even find out your IP address on Windows with both settings menu and Command prompt. Knowing all the different methods, then, will come in handy in places like this.

While other more straightforward methods exist, you can find your IP or MAC address on Windows using PowerShell. Let’s find out how.

Also read: